2 Ton Trolley Floor Jack – Black Bull

Description

I change the tires and perform standard maintenance on my vehicle at home using the the Black Bull Two Ton Trolley Floor Jack.

The 15 inch wheel base features a 360 degree swivel saddle. I know this will provide a stable and safe contact with the load I am lifting. Also, it includes two rear 360 degree swivel ball bearing casters. In addition, it has two front wheels so this Floor Jack is easy to move from one wheel to the next. Obviously, I will save my back! The heavy gauge reinforced steel frame has a weight bearing capacity of 4,000 lbs. The Black Bull Two Ton Trolley Floor Jack has a lifting height of 5 to 12 inches. Finally, I know it will lift most cars, trucks, SUVs, trailers or RVs.

Item # FJ2

I know that using an automotive trolley floor jack involves a few steps to ensure safe and effective lifting of a vehicle. Here’s a general guide I follow on how to use one.

First, I choose a suitable location. For example, I park the vehicle on a flat, solid surface such as a concrete floor. Next, I ensure there is enough space around the vehicle for maneuvering the floor jack and that the parking brake is engaged.

Locate the vehicle’s designated lifting points: I always refer to the vehicle’s manual to identify the recommended lifting points. These are typically reinforced areas along the vehicle’s frame or designated spots indicated by the manufacturer.

Position the floor jack on the ground near the lifting point you intend to use. Ensure the jack is properly assembled and its wheels are free from any obstructions.

If my floor jack has a removable handle, I will insert it into the jack’s pump mechanism. Next, I double-check that the release valve, usually located near the pump handle, is tightly closed.

Engage the lifting arm: I locate the lifting arm or pad of the floor jack. Then I position it directly below the lifting point on the vehicle, ensuring it is centered and stable.

Pump the handle: Grasp the handle firmly and pump it up and down in a smooth, controlled motion. Continue pumping until the lifting arm makes contact with the vehicle’s lifting point. The vehicle will start to lift off the ground gradually.

Lift the vehicle. Next, I pump the handle until the desired height is achieved. Also, I avoid overextending the jack or lifting the vehicle too high, as this can compromise stability.

Place jack stands: Once the vehicle is raised to the desired height, I will position the jack stands beneath the vehicle’s frame. Obviously, jack stands provide additional support. Finally, I know they help prevent accidents in case the floor jack fails.

Next, I lower the vehicle. Then I slowly and carefully turn the release valve counterclockwise. This will release the pressure in the jack’s hydraulic system. Plus, this will initiate a controlled descent of the vehicle. Of course, I make sure to keep my hands and feet clear of any potential pinch points.

Finally, I remove the jack. Once the vehicle is lowered onto the jack stands, I will remove the jack by reversing the steps. Next, I will lower the lifting arm completely. If necessary, I disengage any locking mechanisms to release it from the vehicle’s lifting point.

A Trolley Floor Jack is an essential tool for automotive and RV maintenance, offering numerous benefits. Firstly, I can lift heavy vehicles with ease! Thus, I change tires and perform brake work. In addition, I inspect the undercarriage of my car and RV. The adjustable height and rolling wheels enhance maneuverability, allowing users to position the jack precisely where needed.

Another advantage is safety. It has a wide base for stability. This is crucial when working under vehicles, providing peace of mind during repairs. Additionally, the hydraulic lift mechanism ensures smooth and controlled operation, reducing the risk of sudden drops.

For RV owners, a trolley floor jack is invaluable for maintaining larger vehicles that can be cumbersome to lift. It simplifies tasks like changing tires or checking the undercarriage.

Lastly, I save money over time by performing routine maintenance myself. I avoid costly trips to the mechanic because I will work on my car myself. In summary, I use a Trolley Floor Jack because it is a must-have for my garage tool supply.